How To Clean Filter On Whirlpool Quiet Partner Ii Dishwasher

How to Clean the Dishwasher Filters

Concluding updated
Salvage as PDF

How to Clean the Filters on Your Whirlpool Dishwasher

Cleaning the filters periodically helps keep the dishwasher working at height functioning. The filters can be found at the lesser eye of your dishwasher.

The triple filter organization consists of ii parts, an upper filter assembly, and a lower filter.

dish filters.jpg

The upper filter assembly keeps oversized items and strange objects, along with very fine food particles, out of the pump.
The lower filter keeps nutrient from being recirculated onto your dishes.

The filters may need to be cleaned when:

Visible objects or soils are on the Upper Filter Assembly.
There is deposition in cleaning performance (soils still present on dishes).
Dishes feel gritty to the bear upon.

It is very piece of cake to remove and maintain the filters. The chart beneath shows the recommended cleaning frequency.

filter cleaning schedule.jpg

*Manufacturer'south recommendation: This practice will conserve the water and free energy that yous would take used to prepare your dishes. This volition also save y'all time and attempt.

To remove the dishwasher filter:

Turn the Upper Filter Assembly ¼ turn counterclockwise and elevator out.
Grasp the Lower Filter in the circular opening, lift slightly, and pull forwards to remove.

filter locating tab.jpg

To make clean the filter:

Of import: Do not utilize a wire castor, scouring pad, etc., every bit they may damage the filters.

Rinse filter under running water until most soils are removed. If you accept hard-to-remove soils or calcium deposits from difficult water, a soft brush may exist required.

To Reinstall the filter:

Noting the previous illustrations, place the Lower Filter under the Locating Tabs at the bottom of the dishwasher, and then the circular opening for the Upper Filter Assembly lines up with the round opening in the bottom of the tub.
Insert the Upper Filter Assembly into the circular opening in the Lower Filter.
Slowly rotate the filter clockwise until it drops into identify. Continue to rotate until the filter is locked into place. If the filter is non fully seated (withal turns freely), continue to turn the filter clockwise until it drops and locks into identify.

Annotation: The Upper Filter Assembly arrow does not have to align with the arrow in the Lower Filter as long as the filter is locked.

IMPORTANT: To avoid damage to dishwasher, do not operate your dishwasher without the filters properly installed. Be sure the Lower Filter is deeply in place, and the Upper Filter Assembly is locked into place. If the Upper Filter Assembly turns freely, information technology is not locked into place.

Watch the video below for more information: